Tagra 12 Way Fused Distribution Module

Technical Specifications:

• Max. Outputs: 12
• Max. Input Current (using connector): 16.0A total
• Max. Input Current (soldered to PCB): 24.0A total
• Max. Output Current: 6.3A per output
• Max. Voltage: 48V
• Max. Cable Size: 14 AWG / 2.0mm²
• Min. Cable Size: 24 AWG / 0.2mm²

Strike the balance between convenience and safety with this cost and time saving low voltage fused power distribution module.

Supplied in a row of 12 break away outputs, Ideal for splitting the output from high power LED drivers between lower power circuits.

Each output can accept a 20x5mm glass fuse up to 6.3A and the whole module provides up to 12 protected outputs.

Input and output connections can be made using the pre installed push connect connector blocks.

In instances where input current is more than 16A, pads are provided to allow a cable to be soldered directly to the PCB, this connection method allows for a current of up to 24A to be distributed.

The unique chocolate block design of the PCB means that individual sections can be snapped off to remove unused outputs and allow a single row of 12 outputs to be distributed on different installations.

The PCB is also compatible with the Wurth Elektronik 401B connector which can be soldered to the high current side of the board, if further connectors are required. The module can be surface mounted with a washer and 3mm pan head machine screws.

• 12 Fused Outputs
• 24 Amps Max. Current
• Push Connectors
• Snap Off Design
• 3mm Mounting Fixings
• UK Designed and Approved
• Up to 48V