Syndeo by Tagra | Bluetooth IR Motion | LED Sensor | IP20

ID: B-SYN-S-IR

225.73kr

Sold Out

Specifications:

  • Input Voltage: 3V
  • Connectivity: Bluetooth
  • Sensing Type: IR (Infrared)
  • Transmit Distance: >6M
  • Material: PC
  • IP Rating: IP20
  • Operating Temp: -20°C ~ 40°C
  • Dimensions: 43 x 43 x 9.1mm
  • Certification: UKCA, CE
  • Warranty: 3 Years

Information:

Our Syndeo by Tagra Bluetooth IR Motion Sensor is capable of dimming your lighting and turning it on and off. With a sensing distance of between 3-120mm, use hand motion to operate the sensor. Swiping you hand infront of the IR sensor will turn the lighting on and off, whereas hovering your hand above with increase and decrease brightness. It features a slim discrete design and can be surface mounted or recessed into your kitchen and living areas. 

The LED sensor uses a bluetooth connection to pair with a Syndeo LED Module. Its simple to pair and only requires a short press on both the sensor and module to establish a connection. Powered by a 3V CR2450 battery and able to be controlled from a maximum distance of 6 metres from the LED module. Comes with UKCA and CE certification and a 3 year warranty as standard.

This product must be used with a Single Colour LED Module and Syndeo LED Lights in order to operate. Pair up to 6 sensors to one module, or 1 sensor to a number of modules to control your lighting in various ways. Sensors can be surface mounted using adhesive tape or recessed into a cabinet, shelf or worktop. They come with a mounting case that can be recessed into a surface and held in place with screws. This allows you to keep the sensor in a discrete location with the ability to remove the sensor and use it remotely. 

Our full range of Syndeo LED Sensors & Remotes includes motion sensors, cabinet door sensors, touch dimmers and a remote control. All use bluetooth connectivity and allow you to control your lighting remotely.

Installation:

Rated at IP20, this product is suitable for indoor use only. Mount the LED sensor to a surface using adhesive tape or recess into a material using the mounting case supplied. Connect to the LED module by pressing the mode button, followed by the pair button on the back of the sensor/remote.

Follow the instructions on the user manual for more detailed steps on replacing the battery, recessing and surface mounting the LED sensors.

Required Products:

The list of products below are required in order to properly operate this product:

  • Syndeo by Tagra 24V Single Colour LED Module

Warranty Information

  • 3V Battery Included
  • IR Motion
  • Syndeo Plug & Play Wireless Range
  • Bluetooth
  • IP20
  • 3 Year Warranty