Syndeo by Tagra | Bluetooth IR Door Cabinet | LED Sensor | IP20

Specifications:

• Input Voltage: 3V
• Connectivity: Bluetooth
• Sensing Type: IR (Infrared)
• Transmit Distance: >6M
• Material: PC
• IP Rating: IP20
• Operating Temp: -20°C ~ 40°C
• Dimensions: 43 x 43 x 9.1mm
• Certification: UKCA, CE
• Warranty: 3 Years

Information:

The Syndeo by Tagra Bluetooth IR Door Cabinet Sensor has a front facing infrared sensor which is capable of controlling the LED lighting depending on if the sensor is covered or not. With a sensing range of 0-120mm its perfect for controlling lighting via the opening and closing of doors. The sensor can be placed in the middle of 2 opening doors as the infrared sensing angle of 40° will cover both openings. It features a slim discrete design and can be surface mounted or recessed into your kitchen and living areas. 

The LED sensor uses a bluetooth connection to pair with a Syndeo LED Module. Its simple to pair and only requires a short press on both the sensor and module to establish a connection. Powered by a 3V CR2450 battery and able to be controlled from a maximum distance of 6 metres from the LED module. Comes with UKCA and CE certification and a 3 year warranty as standard.

This product must be used with a Single Colour LED Module and Syndeo LED Lights in order to operate. Pair up to 6 sensors to one module, or 1 sensor to a number of modules to control your lighting in various ways. Sensors can be surface mounted using adhesive tape or recessed into a cabinet, shelf or worktop. They come with a mounting case that can be recessed into a surface and held in place with screws. This allows you to keep the sensor in a discrete location with the ability to remove the sensor and use it remotely. 

Our full range of Syndeo LED Sensors & Remotes includes motion sensors, cabinet door sensors, touch dimmers and a remote control. All use bluetooth connectivity and allow you to control your lighting remotely.

Installation:

Rated at IP20, this product is suitable for indoor use only. Mount the LED sensor to a surface using adhesive tape or recess into a material using the mounting case supplied. Connect to the LED module by pressing the mode button, followed by the pair button on the back of the sensor/remote.

Follow the instructions on the user manual for more detailed steps on replacing the battery, recessing and surface mounting the LED sensors.

Required Products:

The list of products below are required in order to properly operate this product:

• Syndeo by Tagra 24V Single Colour LED Module

• 3V Battery Included
• IR Door Cabinet
• Syndeo Plug & Play Wireless Range
• Bluetooth
• IP20
• 3 Year Warranty