Solderless IP Tape To Wire Snap Connectors for 10mm 2 Core Single Colour LED Tapes

ID: CB-IP10MM-2WIRE

€4.70

Technical Specifications:

  • LED Tape Compatibility: White and Single Colour LED tapes with 30 to 120 LEDs per Meter IP Silicone encased LED tape, 10mm in width
  • Rated Current Current: Up to 5 Amps
  • Rated Voltage: 0-36V
  • Operating Temperature: -20ºC to +50ºC
  • PU Casing Temperature Resistance: 105º
  • Compatible Wire Diameter (Including Insulation) : 1.5mm to 2.1mm
  • Casing Material: PU
  • Contact Point Material: Copper
  • Fire Resistance: Conforms to UL 94-V0
  • Dimensions (W x L x H): 15mm x 27mm x 4mm
  • Certification: CE, RoHS

 

A new innovative design of Solderless IP rated connectors designed to connect 2 core cable to an IP rated Single Colour LED tape with a width of 10mm. As well as the connector, included in the pack is a tube of silicone ready for post installation injection to maintain IP65 rating once secured.

 

Minimise your installation times and costs with this new connection system, designed to be both simple to fit and maintain a long term professional standard installation.

 

These can also be used as corner connectors with a length of 2 core cable installed between two connectors and connecting two runs of LED tape.

 

Installation instructions can be downloaded below.

 

Supplied with a 10ml tube of transparent silicone sealant.

 

Please Note: IP Rating is subject to correct installation, suitable for installation into LED channel with an internal width of 15mm or more. NOT compatible with COB LED Tapes. Cable NOT included.

 

Warranty Information

  • Innovative Solderless Design
  • Silicone Injection Technology
  • For 10mm IP Rated Single Colour LED Tape
  • 2 Cores
  • 15mm Width
  • Pack of 2 Connectors
  • Silicone Sealant Included