Tagra | IP65 | 24V | Essential | Horizontal Bend LED Neon Flex | 15x26mm | 12.0W p/m | RGB | 50 Metres

Specifications:

• Voltage - 24v
• Dimensions - 15mm x 26mm
• LED Type - SMD5050
• Number Of LEDs - 72 Per Metre
• Unit/Cut Length - 8.33cm
• Max Load - 12m
• LED Distance - 8.33mm
• Power - 12W Per Metre
• Lumens - 370 Per Metre
• Jacket Type: Dome
• Splashproof, subject to correct installation.
• Bent Angle - 4cm
• All our neon flex comes with a 1 year guarantee on indoor installations and a 6 month guarantee for outdoor installations.

Now available in a 50 metre reel, our LED Neon flex is a flexible light tube designed to produce an ambient linear lighting effect and is perfect for single use display lighting. PVC totally diffused, 'no shadow' no spots and flexible.

It's durable body allows for installations both in and outdoors where light water exposure may occur.  Pair with one of our RGB controllers for colour changing effects.

Neon Flex looks better than glass neon - and it opens all the environments where fragile Glass Neon cannot be used. As the name suggests, it is highly flexible. LED Neon Flex can be bent to a minimum radius of 4 cm, and can be cut easily to your desired lengths. Maximum Length at any time is 12 metres.

This neon flex comes with a 1 year guarantee for indoor installations and a 6 month guarantee for outdoor installations. 

Please Note: We are not able to offer refunds on cut lengths of Neon Flex, only for full 50m reels. Our 50 metre reels of Neon flex are supplied in a continuous length. 

For a working Neon Flex installation you will need:

• Neon Flex LED 
• 1 x Neon Flex Power Cable
• 1 x Neon Flex Connector Pin
• 1 x Neon Flex End Cap
• 1 x 24 volt power supply

Heat shrink tube is also highly recommended to seal both the endcap and power cable in order to maintain the waterproof rating.

Dimming and Control Compatibility

• Compatible with dimmers and controllers using standard control protocols including DMX, Dali, 0-10V, PWM.
• Compatible with smarthome dimmers and controllers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.

A 24v LED Transformer is required to power our Neon Flex. A full 12 metre run will need a power supply higher than 160w.

All products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

• Up to 370 Lumens p/m
• 12 Watts p/m
• Colour changing
• Domed
• Horizontal bend
• Splashproof
• Dimmable
• Perfect for short term use