Tagra | IP68 | 24V | Architectural | Vertical Bend LED Neon Flex | 16x17mm | 16.5W p/m | RGB Pixel

Specifications:

• Voltage: 24V
• Max. Power: 16.5W/m
• LEDs per metre: 84 LEDs
• Cut Points: 83.3mm
• Bend: Vertical Bending
• CRI: >80
• Beam Angle: 120°
• SDCM: <2
• Material: Silicone
• Water Resistance: IP68
• Lumens: Up to 300lm/m
• Dimensions: 16mm x 17mm
• Warranty: 3 Years

Information:

Introducing our Architectural Pixel LED Neon Flex. Produce amazing chasing, pulsing and animated light effects and make your vision come to life. Made from silicone this product is a popular product for the architectural market and perfect for use on facades, yachts, ships and stadium lighting. The silicone material offers excellent weatherproofing and UV resistance. It has an ambient working temperature of -40°C ~ +55°C making it especially suitable for harsh environment application.

This is an SPI protocol product with built-in IC chip (UCS2903). Each IC chip controls 7 5050 LED chips creating 12 sections along the LED neon that can be controlled, helping it produce visual lighting effects.

Featuring advanced silicone encapsulation and injection moulded construction and available with patented wire connection technology for a safe and secure outlet connection. Features a rated power of 16.5W per metre and a robust 4oz copper PCB allows for superior heat management and current capacity resulting in greater lifespan.

Part of the Architectural LED Neon Flex range it is capable of achieving a IP68 water ingress rating. Recommeded for outdoor use and able to reach a maximum run length of 8 metres when powered from a single end. Manufactured using high quality materials and components.

This product is solvent resistant, UV resistant, flame resistant and salt water resistant and has an IK10 impact protection rating.

Comes as a bespoke request product and can be cut to your desired length with cut points located at 83.3mm intervals.

Installation:

Available in IP68 making it suitable for outdoor and marine grade installations. Suitable for use with neon flex mounting channel. We recommend installing our LED neon flex within a LED Profile. These offer protection for the neon flex and the aluminium material acts as a heat sink, reducing the chance of over-heating and prolonging the life of the product.

Required Products:

The list of products below are required in order to properly operate this product:

• 24V LED Driver
• 24V LED Pixel Controller

• Up to 300 Lumens Per Metre
• IP68
• 16mm x 17mm
• Silicone
• Vertical Bend
• IC UCS2903 Protocol
• 3 Year Warranty