4 Channel 8A, 12-48V DC, CV, DMX512 Decoder

Specifications:

• Input Signal: DMX512
• Input Voltage: 12V~48V DC
• Input Current: 32.5A
• Output Voltage: 4 x (12-48)VDC
• Output Current: 4x 8A @ 12/24V | 4x 6A @ 36/48V
• Output Power: 4x 96W @ 12V | 4x 192W @ 24V | 4x 216W @ 36V | 4x 288W @ 48V
• Output Type: Constant Voltage
• Dimensions (mm): 175L x 46W x 32H
• Warranty: 5 Years

Information:

Featuring a 4 channel output this DMX Decoder is ideal for controlling RGB+W LED strip lights but also suitable for RGB, CCT and single colour LED strip lights. Requires a DMX512 input signal to operate which can be connected to the decoder via the RJ45 DMX signal ports. 

A digital numeric display screen helps you set your DMX address via the press of a button. Choose between logarithmic or linear dimming curves and also adjust the dimming increments from 8 bit (246 levels) to 16 bit (65536 levels). Select your desired PWM frequency from the seven options available.

Manufactured from high quality materials and components and comes with a 5 year warranty as standard. Also features built-in protection including over-heat, over-load and short circuit protection which recovers automatically. 

Installation:

Available in IP20 making it suitable for indoor installation. We recommend installing our LED controllers using the mounting points located on the product. Make sure to install the product onto a smooth and clean surface and in a well ventilated area to reduce any chance of over-heating and to prolong the life of the product.

Required Products:

The list of products below are required in order to properly operate this product:

• DMX Master Control Signal
• 12-48V LED Driver