Tagra | IP65 | 12V | Professional | Micro Horizontal Bend LED Neon Flex | 4x10mm | 7.9W p/m | 2700K | 5 Metre Kit

Technical Specifications:

• Voltage: 12V
• Dimensions - 4mm x 10mm
• LED Type - SMD2835 in Epistar Chip
• Current: 0.6 Amp
• Unit/Cut Length – 17mm
• Max Load - 5m
• Power – 7.9W Per Metre
• Lumens - 300 Per Metre
• CRI - >80
• Jacket Type: Flat injection moulded silicone
• IP Rating - IP65 subject to correct installation.
• Max Bend Radius – 30mm

4x10mm Micro Neon Flex is a high-quality lighting solution designed primarily for furniture lighting. It has a silicone outer casing which means it is both durable and flexible and allows it to easily fit into a correctly sized routed groove, making for a flush, seamless finish to your installation.

Neon Flex is a durable fully diffused linear light perfect for furniture installations thanks to it’s ultra slimline micro profile. This neon can be cut easily to your desired lengths at the allocated cut points. Maximum length at any time is 5 metres before visible voltage drops occur.

With its vibrant neon glow, this micro flex adds a touch of personality and style to any furniture piece. It is low voltage and energy-efficient, making it both safe and cost-effective to use.

Whether you're looking to light up a kitchen counter, accent a bookshelf, or brighten up a bathroom mirror, the 4x10mm Micro Neon Flex is the perfect choice for all your furniture lighting needs.

It's durable IP65 body allows for installations where light water exposure may occur, such as in a bathroom or kitchen.

This 5m kit comes with everything you will need for installation including mounting brackets, endcaps, a spare 500mm length of 2 core cable, silicone sealant and a pre attached 2 core tinned end cable at one end, ready for hard wiring into a compatible controller and/or 12V driver.

Neon Flex can be dimmed via mains dimming, DALI, DMX, RF or 0-10 controllers.

Our 4x10 Micro Neon Flex comes with a 3 year guarantee as standard on indoor installations.

Dimming Compatibility

• Compatible with dimmers using standard control protocols including DMX, Dali, 0-10V, PWM.
• Compatible with smarthome dimmers including those from Lutron, Loxone, Rayco, Control 4, Lightwave, Wizz, Casambi, Crestron.

Driver Requirements:
1 metre > 8w
2 metre > 16w
3 metre > 24w
4 metre > 32w
5 metre > 40w

all products should be installed by a technically competent person in accordance with BS7671 and all other local regulations.

• 2700K
• Horizontal Bend
• 7.9 Watts p/m
• 5 Metre Kit
• Flat
• IP65
• 12V
• 30mm Max. Bend Radius
• Dimmable